Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router supports Cat. 18 and perfect for the operators who are looking for 4G LTE FWA solutions to deliver ultra-fast and high-capacity premium broadband services with deployment flexibility.
|
Lightning-fast internet connectivity
|
The Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router employs 3GPP UE downlink Category 18 – the top-level LTE technology with downlink data rates of up to 1.2 Gbps through 12 spatial streams on three component carriers.
|
Built-in 4x4 MIMO high-gain antenna
|
The Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router provides 4x4 MIMO high-gain antennas of up to 7 dBi per element that work effectively in outdoor environments. The outdoor design enables it to work under near non-line-of-sight conditions to increase coverage and bandwidth as well as to eliminate edge corners having difficulty accessing good signals.
|
Strengthen your competitive edge with Fixed Wireless Access (FWA)
|
Deploying LTE7490-M904 as part of FWA allows you to extend your 4G service coverage into subscribers’ homes and workplaces without extra wire infrastructure. This secures the TCOs and increases business revenue by supporting a larger number of subscribers with a premium fixed-grade connection.
|
Non-stop connectivity with LTE 2nd WAN for failover
|
The wireless LTE allows you to take advantage of the 2nd WAN without a cabling plan. As long as the gateway supports "Dual-WAN Failover", you can just connect Zyxel LTE7490-M904 to the existing gateway and set LTE as the failover WAN and relieve the risk of network outage.
|
IP networking
|
Supports IPv4/IPv6 dual stack (NDP IPv6)
|
DHCP server
|
Supports ICMP
|
Virtual Private Network (VPN) passthrough
|
Supports NAT/NAPT
|
Supports NAT DMZ
|
Supports port forwarding/triggering
|
Supports ALG
|
Routing
|
Supports router mode
|
Supports bridge (IP pass-through) mode
|
Supports dynamic DNS for first APN
|
Supports remote management under bridge mode
|
IP firewall
|
Firewall can be enabled or disabled via GUI
|
DoS attack prevention
|
Supports SPI
|
Application-level firewall
|
Filters LAN MAC addresses
|
Filters URLs
|
Management
|
Supports local/remote device management and firmware upgrade via TR-069, HTTP/web GUI and FTP
|
APN management
|
Account management
|
PIN/PUK management
|
Network selection
|
Operating frequency band selection
|
CLI/SSH (local and remote SSH access)
|
Supports UPnP IGD
|
Supports SSH with key access certification management
|
Supports bandwidth/quota management
|
Supports mobile apps (iOS and Android) for easy installation and local management only
|
Supports remote throughput testing by TR-143
|
WiFi Protected Setup (WPS)
|
Hidden SSID
|
LTE interface
|
Standard-compliant:
|
3GPP UE DL Category 18, UL Category 13
|
Supports LTE bands:
|
B1/B3/B5/B7/B8/B20/B28/38/40/41
|
Supports DL transmission mode TM1/2/3/4/6/7/8/9
|
LTE antennas:
|
4 embedded directional antennas of up to 7 dBi/element (4x4 MIMO)
|
Supports DL 5xCA**, 2x2 MIMO
|
Supports DL 3xCA, 4x4 MIMO, B1/3/7**
|
Supports DL modulations QPSK, 16-QAM, 64-QAM and 256-QAM
|
Supports UL modulations QPSK, 16-QAM and 64-QAM
|
Supports UL 2xCA** intra-band, B3/7/38/40/41
|
Peak data rates:
|
DL:
|
1.2 Gbps within 100 MHz bandwidth
|
UL:
|
150 Mbps within 40 MHz bandwidth
|
UMTS Air interface
|
Standard-compliant:
|
WCDMA bands 1/3/5/8
|
Supported frequencies:
|
HSPA+/UMTS:
|
2100/1800/900/850 MHz (bands 1/3/5/8)
|
WCDMA:
|
2100/1800/900/850 MHz
|
HSPA+ downlink data rates up to 42 Mbps
|
HSUPA uplink data rates up to 5.76 Mbps
|
WiFi Air interface***
|
Wireless standards:
|
802.11 b/g/n, 2.4 GHz, 300 Mbps
|
Wireless omni antennas:
|
WiFi 2.4 GHz:
|
2x2 internal antennas up to 3 dBi
|
Hardware Interface
|
One Gigabit RJ-45 PoE LAN port
|
One LED indicator for:
|
Power status
|
Internet status
|
LTE signal strength
|
WiFi status
|
LAN status
|
One WiFi on/off button
|
One 3FF micro SIM card socket
|
One reset to default button
|
Power specifications
|
Standard 802.3af/at Power over Ethernet (PoE)
|
Power consumption at PoE < 16 W
|
Power consumption
|
16 watt (peak)
|
Physical specifications
|
Item dimensions (WxDxH):
|
254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
|
Item weight:
|
1100 g (2.43 lb.)
|
Package dimensions (WxDxH):
|
280 x 402 x 108 mm (11.02” x 15.83” x 4.25”)
|
Package weight:
|
2520 g (5.55 lb.)
|
Environmental specifications
|
Ingress Protection rating
|
IP68 harden for outdoor environments
|
Lightning protection
|
K.21 enhanced mode, 6 kV
|
Operating environment
|
Temperature:
|
-40°C to 60°C (-40°F to 140°F)
|
Humidity:
|
5% to 95% (non-condensing)
|
Storage environment
|
Temperature:
|
-40°C to 70°C (-40°F to 158°F)
|
Humidity:
|
5% to 95% (non-condensing)
|
Certification
|
CE
|
WEEE (Waste Electrical and Electronic Equipment) Directive certification
|
RoHS (Restriction of Hazardous Substances) Directive certification
|
HSF (Hazardous Substance Free)
|
European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste
|
Package contents
|
Standard 802.3af/at Power of Ethernet (PoE) injector
|
1.8 m Ethernet cable yellow 8P8C
|
Power cord
|
PG19 thread (cable gland)
|
Quick Start Guide
|
Warranty card
|
DoC and safety warning
|
Wall/pole mounting kit
|
Wire grounding kit
|